Home Products1-10V Dimmable LED Driver

1-10V Dimmable LED Driver 250 – 700mA , High Efficiency LED Dimming Driver

Certification
Good quality Dimmable Motion Sensor for sales
I'm Online Chat Now

1-10V Dimmable LED Driver 250 – 700mA , High Efficiency LED Dimming Driver

China 1-10V Dimmable LED Driver 250 – 700mA , High Efficiency LED Dimming Driver supplier

Large Image :  1-10V Dimmable LED Driver 250 – 700mA , High Efficiency LED Dimming Driver

Product Details:

Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO / CE/ RoHS
Model Number: ML30C-PV

Payment & Shipping Terms:

Minimum Order Quantity: 100Pcs
Price: Negotiation
Packaging Details: Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms: T/T, Western Union, PayPal
Supply Ability: 10,000pcs per month
Detailed Product Description
Product Name: Dimming Led Driver Output Load: 30W Max
Stand-by Power: ≤0.5W Output Voltage: 68Vdc Max
Efficiency: ≥84% Input Currenct: 0.18A Max
Certification: CE,SEMKO, RoHS Protection Class: IP20
Life Time: 50000 Hours Power Factor: ≥0.9

ML30C-PV 1x30W PUSH / 1-10V Dimmable LED Driver For LED Panel Light 250 – 700mA 103x67x22mm
 
Features
1,Stand-by power below 0.5W
2, ML30C-PV is multi-current supply, selection of output current through DIP switch
3, 12Vdc /24Vdc is not constant voltage strictly, it is a limit that the output voltage will not exceed 12Vdc /24Vdc when output 700mA. So the output load range by 12Vdc( 0-700mA )is 8.4W max
4. with 1-10V and push button
5, Flicker-free for whole dimming range
6, Jumper design for switching different dimming modes, it is very convenient to select suitable
dimming mode as you required
7, Synchronization: thanks to the MCU programme, up to 15pcs drivers should be controlled by the
same switch. This means there is no need for any additional synchrony wire in larger installations,
where many drivers should be controlled by one switch
8, Memory function: The driver has built-in permanent memory against power failure. Lights can
return to previous dimming level when switch off and on again, even at mains restores
9, Maximum length of the cable, from switch to last driver is 20m
10, Factory setting: 100% dimming level and 250mA output
11, Dim via a potentiometer is your choice
12, Protection: Short circuit / Over voltage / Over temperature
13, 5 years guaranty
14, Support master-slave grouping net working
15, Derating current for over high ambient temperature
 
Mechanical Specification
 
1-10V Dimmable LED Driver 250 – 700mA , High Efficiency LED Dimming Driver
Dimming Operation:
1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)
The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C
 
Wiring Diagram:
 
 
Specifications:

 
 
INPUT
 

Input voltage220-240Vac
Input frequency50-60Hz
Input current0.18A max
Power factor (Note 1)≥0.90
Efficiency(Note1)≥84%
Stand-by power (Note 2)≤0.5W

 
 
 
OUTPUT
 

Output current/ voltage

250mA 6~60V DC 15W max.; 350mA 6~60V DC 21W max
400mA 6~60V DC 24W max.; 450mA 6~60V DC 27W max.
500mA 6~58V DC 29W max.; 550mA 6~55V DC 30.2W max
600mA 6~50V DC 30W max.; 700mA 6~43V DC 30.1W max
12V (0~700mA) 8.4W max.; 24V (0~700mA) 16.8W max.

Output load range30.2W Max.
Current accuracy±5%
Dimming mode1-10V, PUSH

 
 
ENVIRONMENT
 

Working temp.(Ta)-20~50℃
Surface temp.(Tc)85℃max
Working humidity20~85%RH non-condensing
Storage temp.-40~80℃
Life time≥50000hours

 
PROTECTION
 

Isolation classClass Ⅰ
Protection classIP20
Over voltage300Vac, 2H
Short circuitProtection type; auto reset
No-loadProtection type; auto reset
Over temperatureProtection type; auto reset

 
 
 
OTHERS
 

SafetyEN61347-1 EN61347-2-13
EMCEN55015, EN61000-3-2
EN61000-3-3, EN61547
ApprovalsSEMKO, CE, RoHS
Withstand voltageIN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H)103x67x22mm
Connection

Press-in type terminals, 0.75-1.5mm2
Input: L, N, PUSH, PE
Output: SEC(+)SEC(-), 1-10V(+),1-10V(-)

 
NOTE

Note:
1, Power factor and efficiency is detected at 230Vac input and full load.
2, Standby power is detected at 230Vac input and switch off led load by push button.

 
 
 
Applications
 
For LED panel light, LED down light, led strip, led tube etc…
 
 
Wire diagram
 

Contact Details
Shenzhen Merrytek Technology Co., Ltd.

Contact Person: june zhao

Send your inquiry directly to us (0 / 3000)