KL25C-PDiiV

Features

Flicker-free for wholedimming range
Stand-by power below 0.5W
Primary dimming with push button
1-10V dimming function
Built-in DALI interfaceDT6
Protection: short circuit / over temperature/ over voltage
Derating current for over high ambient temperature
Push dim with memory function
5 year warranty

Dimension & Function Diagram

Parameter characteristics

Input	Voltage range	198~264Vac 50Hz/60Hz
	Rated supply voltage	220~240Vac 50Hz/60Hz
	DC voltage range	200~240Vdc
	Input current	0.14A Max.@230Vac
	Inrush Current	8A (Half current pulse width 50us) @230VAC
	Power factor	≥0.95 (@230Vac, 500mA/45Vdc, 100% load)
	Total harmonic distortion	Typical: 20% (@230Vac, 100% load)
	Stand-by power	≤0.5W
	Efficienc（@230Vac,100% load）	86%Max
	Wiring method	Push terminal, wire cross section:0.75-1.0mm²
	Loop-in&Loop-out quantity	30PCS（@230Vac）
	Automatic circuit breaker (Calculate current in the wire)	type	B10	B13	B16	B20	B25	/
		Number	25	35	45	50	65	/
		type	C10	C13	C16	C20	C25	C32
		Number	55	65	75	110	130	160
Output	Operating mode	Constant current
	Load type	LED
	Flickering / Flickering-Free	Flickering-Free
	Start up time	<1s (@230Vac)
	Load output voltage range	9-58Vdc
	Load output current	150mA(9-58Vdc) ,350mA(9-58Vdc), 550mA(9-45Vdc)
	Full load output power	25W Max.
	No load output voltage	72Vdc Max.
	Output current/voltage tolerance	±5%
	Wiring method	Push terminal, wire cross section:0.75-1.0mm²
Control Method	Primary PUSH Dimming	Primary PUSH dimming (Max. lead wire length：20m）
	Dimming Range	Primary PUSH & DALI dimming: 0%-100% 1-10V dimming：2%-100%
	DALI function	DALI dimming (Max. lead wire length：300m）
	1-10V Dimming	1-10V
	Output auxiliary power port	12Vdc, 0.1A Max.
	Sensor Dimming port	1-10V
Exception Protection Requirements	Output over temperature protection	Yes, reset power on to recover
	Output short circuit protection	Yes, reset power on to recover
Operating Environment	Operating temperature/ humidity	-25℃~50℃ Humidity:85% (Non-condensing)
	Storage temperature/ humidity	-40℃~80℃, Humidity:10%–85% (Non-condensing)
	Max. case temp（Tc）	85℃
Safety & EMC	EMC standard	EN55015, EN61547, EN61000-3-2, EN61000-3-3
	DALI standard	IEC62386-102, IEC62386-207
	Safety standard	EN61347-1, EN61347-2-13
	Certification	CE
	Withstand voltage	3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) 1500Vac, 5mA, 60s (Input “L N”- “PE”) 500Vac, 5mA, 60s (Input “PE”- Output “SEC”)
Others	Degrees of protection	IP20
	Type of protection	Class I
	Installation type	Independent installation
	Installation dimension	1105023.5mm
	Memory function	Yes, (PUSH with memory function)
	PUSH dimming synchronization	Parallel: 15 units Max. Series: 25 units Max.
	Packaging requirements	PE bag + white-box + Instruction+clapboard+outer carton (K=A)
	Weight	140±5g
	Life	5 years @Ta 100% load
Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified.

Product details

ON/OFF & Description of Dimming Operation

Short press the PUSH switch (short press time 0.1s-1s), the LED driver will turn on or off.
Dimming: Press and hold the PUSH switch (1s-8s), the LED driver can achieve dimming, brightening or dimming, the dimming range is 2-100%.
Memory: PUSH dimming has dimming memory function.
Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15s
DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.