High-mounting microwave motion sensor (ON/OFF version)
MSA003S RC is a 5.8GHz microwave sensor with high antenna gain and wide sensing range,which support max 15m installation.Combined with our unique software algorithm and our anttena’s exclusive narrow detection radiation, it can perfectly detect human movements in hallway/corridor/long passage/aisle etc to trigger smart scene application.
| Input/Output | Input voltage | 100-240V AC 50-60HZ |
| Rated voltage | 220V AC | |
| Working current | 50mA max | |
| Power consumption | ≤1W 230VDC | |
| Load capacity | 800w resistive loading or 400w inductive loading | |
| Loading instant peak current | 30A | |
| Sensor parameter |
Radar frequency | 5.8GHz±75MHZ ISM band |
| Radar transmit power | 5mW Max | |
| Detection sensitivity | 25%-100% | |
| Hold Time | 5s-30min | |
| Radius detection range(based on 100% sensitivity) |
12-15m max detection range for the longer side and 3-5m max detection range for the short side based on 3m installation | |
| Daylight sensor | 5-150lux/Disable | |
| Remote control | Available | |
| Mounting height | 3-12m typical value: 3m/12m | |
| Detecting Angle | 150° | |
| Application environment |
Installation | Surface mounting |
| Working temperature | 0℃…+50℃ | |
| Storage temperature | -25℃~+80℃ | |
| Certificate Standard |
Certificate | FCC/RED |
| Environmental requirements | Compliant to RoHS | |
| IP rating | IP20 | |
| N/A” means not available | ||
Dimension
Initialization
When powered on,sensor indicator will turn off after flashing for 10S and will not detect moving signal during this time. After 10S,you can use our MH10 remote to adjust detection area、hold time and daylight sensor etc parameter.
Factory setting
Detection Sensitivity: 100%, Hold Time :5s, Indicator light: OFF, Daylight sensor :Disable
Detection Signal
The product detects human moving signals and below is a description of the moving signals:
Wiring layout suggestion:
1. LN terminal stands for AC input, L’N’ stands for AC output,please wiring correctly
2. One sensor’s max loading capacity is 800w resistive loading and 400w inductive loading for one single load. if you want connect more load in one loop, we recommend to add an AC contactor in our output LN terminal to avoid momentary surge overload.
