MSA205

Features

Precise human presence detection
Conceal embedded mounting
Presence and Absence signal output
Environment daylight lux output
DALI 2.0 protocol communication
In accordance with IEC62386 101、103、303 and 304 command
Detection sensitivity and hold time adjustable by remote or switch DIP
International 24GHz ISMband adopted
Max human presence detection area: 4-6m diameter
Max minor motion detection area: 4-6m diameter
Max movement motion detection area: 4-6m diameter
One sensor One room control
Time interval from absence to presence: within 0.5s
Time interval from presence to absence: more than 30s
Super low RF power output and harmless to human health
Product performance immune to temperature、humidity、noise、airflow、ash and sunshine

Dimension & Function Diagram

Parameter characteristics

Input/Output	Input voltage	220-240V AC
	Rated voltage	230V AC
	Consumption power	≤1W @230V AC
	Communication mode	DALI BUS
Motion datasheet	RF frequency	24GHz -24.25GHz，ISM band
	TX power	3dBmMax
	Detection sensitivity	DIP switch setting: 100% 75% 50% 25% MH10 remote setting：100% 75% 50% 25%
	Hold Time	DIP switch setting: 5S 1Min 3Min 5Min MH10 remote setting：5S/ 30S /1Min / 3Min /5Min /10Min /20Min/30Min
	Daylight threshold	N/A
	Daylight lux range	5-1200Lux
	Detection range (based on 100% sensitivity )	Movement motion（based on 3m height mounting）：radius 2-3m Minor motion（based on 3m height mounting）：radius 2-3m Human presence（based on 3m height mounting）：radius 2-3m
	Rated mounting height	2.5-4.0m (Typical height:3m)
	3db beam angel	80°（XZ axis）
	3db beam angel	96°（YZ axis）
Application environment	Working temperature	0℃…+50℃
Application environment	Storage	-40℃~+80℃
Certificate	RF certificate	In accordance with FCC/RED
	Environmental certificate	In accordance with EU RoHS
	IP rate	IP20
Remark：“N/A” means Not applicable to this product

Product details

Appearance feature

Size：φ105x85mm
Terminal：4 hole press terminal

Initialization

For the initial 20S interval once our motion sensor is powered,our motion sensor’s sensing function is disabled and can’t response to human motion.After that,our motion sensor can work normally and its indication light can be turned on or off by our MH10 remote control.

Factory setting

Detection sensitivity: 100%, Hold time: 1 Minute

Motion signal description

Our 24GHz millimeter motion sensor can precisely detect human movement motion and human presence signal to output presence and absence status,and below is human movement motion and human presence signal description

Movement motion：It refers to human big movement behaviour,such as walking within our detection area
Human presence：It refers to human vital signs,such as breathing and finger tapping within our detection

Remark: Only when our motion sensor is triggered by movement motion firstly,so that it can detect human presence