|Place of Origin:||Shenzhen|
|Minimum Order Quantity:||100|
|Packaging Details:||Packed in bubble bag firstly, and then reinforced with carton for outer packing|
|Delivery Time:||1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.|
|Operating Voltage Range:||220-240VAC||Stand-by Power:||<0.5W|
|Operating Frequency:||5.8 GHz ±75 MHz. ISM Wave Band||Hold Time:||5S/30S/1min/3min/5min/10min|
|Detection Area:||25%/50%/75%/100%||Daylight Sensor:||2Lux/10Lux/30Lux/50Lux/Disable (Diffusion State)|
Microwave Motion Sensor Designed for Slim Lights with Large Detecting Area MC095S
for slim lamps like ceiling lights, tri-proof lights, linear lights and batten, etc
|Input||Operating Voltage Range||198-264VAC 50/60Hz|
|Rated Voltage||220-240VAC 50/60Hz|
|Surge Test||Between L and N: 1KV|
|Type of Load||Resistive or Capacitive|
|Load Capacity||400W@230VAC(Capacitive), 800W @230VAC(Resistive)|
|Load surge current||30A relay - 30A (test twidth 500us @230Vac at 50% Ipeak, cold start at full load) or 60A (test twidth 200us @230Vac at 50% Ipeak, cold start at full load)|
|Sensor||HF system||5.8 GHz ±75 MHz, ISM wave band|
|Transmitting power||0.5mW Max.|
|Daylight sensor||2Lux/10Lux/30Lux/50Lux/Disable (Diffusion state)|
|Detecting Radius||Motion detection:>firstname.lastname@example.org/S, >2.5m@1m/S (Installed at 3m high )|
|Operating temperature||-20℃…+50℃ Humidity: 85% (non-condensing)|
|Certificate Standards||Safety standards||EN61058-1, EN61058-1-2|
|EMC standards||EN55015, EN61547, EN61000-3-2, EN61000-3-3|
|Others||Input/output terminal specifications||0.75-1.5mm2|
|Protection Class||Class II|
|Package||Bubble bag + partition + outer box (K=A)|
|Lifetime||5 years warranty @Ta 230V full load|
4. Dimension (mm)
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
7. Radiation Pattern
*50%, 75%, 100% detection sensitivity is workable when installed at 6m mounting height. Only 25% sensitivity is not able to detect motion signal.
The data on detection pattern is typical value tested without any lighting fixture in Merrytek factory, the detection range could be affected by moving speed, installation height, motion object and different environment.
8. Function Dialing Settings
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.
Detection Area: 100%, Hold Time: 5S, Daylight Sensor: Disable
1) This product is only used indoors and supports built-in (lamp) installation.
2) When installing multiple products, it is recommended that the distance between each product is> 2m.
3) The microwave will penetrate the wooden wall when used in a wooden room, and cause false trigger when a human body moves in the next room. If this happens, please lower the detection area sensitivity.
4) Microwave cannot penetrate metal. Avoid installing the product in a closed or semi-enclosed metal lamp, and the product antenna cannot be covered by metal plates, glass and other objects with high dielectric density; the obstruction (non-metal /glass) should keep a distance of 15mm or more.