MC002D 6

Initialization
Sensor turns on the light at 100% brightness when first power on, and turns off the light after ten seconds. During the initialization, sensor does not detect moving signals.

Factory Setting
Detection Area: 100%, Hold Time:5S ,Stand-by period:0S , Stand-by dim level:20%, Daylight sensor: Disable

Application Notice

• The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch.
• Microwaves cannot penetrate metal. Do not place the product in a closed metal lamp or a half-closed metal lamp and metal or glass are not allowed to cover above the product. If antenna needs to pass through the metal plate, please ensure that the top of the sensor is close to the metal plate.
• The distance between any inductive sensors should be greater than two meters. Keep sensor away from switches, routers and other wireless devices to avoid radio interference, more than three meters. The antenna surface of the microwave module should not be directly facing input AC and output DC to avoid low or high frequency signals affecting the normal operation of microwave sensor’s antenna.
• Vibration signals will be regarded as moving signals to trigger the sensor. Avoid using objects that vibrate for a long time around the sensor, such as large metal equipment, pipes, air conditioning outlets, exhaust vents, smoke exhaust machine ports, shaking fans, etc. Pets in detecting area may trigger sensing.
• This model is suitable for ceiling mounting. If wall mounting, the detecting area will enlarge, which makes microwave penetrate wall or light not turn off. Please change “detection area” to 25%. If 25% is useless, please avoid wall mounting or contact the manufacturer for technical support.
• This model is suitable for ceiling mounting. If wall mounting, the detecting area will enlarge which makes microwave penetrate wall or light not turn off, and please change sensitivity to 25%. If 25%sensitivity is useless, please avoid wall mounting or contact the manufacturer for technical support.(7) Due to continuous improvement, the contents of this instruction could be changed without prior notice.
• Different PWM drivers, different low brightness. The daylight threshold is measured in a sunny environment without shadow and ambient light diffuse reflection.
• Ambient lux level could be different in different environment, weather, climate, time-of-day and season.
• Sensitivity distance is related to moving speed of objects, size of moving objects, mounting height, mounting angle, working environment, reflecting materials and others.
• Given detecting distance is typical value that was measured by 165cm high testers in an indoor open environment.
• This product needs using with voltage-stabilized DC power supply whose input voltage is stable and ripple factor is low(ripple factor is lower than 100mV; load current is greater than 25mA).