| Input | Input Voltage | 108-305VAC |
| DC input voltage | N/A | |
| Rated Voltage | 120-277VAC | |
| Stand-by Power | ≤1W | |
| Surge | L-N 1KV | |
| Wiring | Press-in terminals 0.75-1.5mm2 | |
| Output | Ouput voltage | 12Vdc |
| Sensor Parameters | Working mode | ON/OFF,0-10V dimming |
| Transmitting power | 0.5mW Max. | |
| Load Capacity | 120V,50/60Hz,2A ballast 277V,50/60Hz 2A,ballast 220-240V,50/60Hz,2A Inductive |
|
| 0-10V dimming | <50mA 10%（1.4-1.6V）,20%(1.9-2.1V),30%(2.9-3.1V),50%(4.9-5.1V) |
|
| Wiring | Press-in terminals 0.75-1.5mm2 | |
| Operating Environment | Operating Temperature | -25℃…+60℃ |
| Storage Temperature | Temperature: -40℃…+80℃; Humidity: 10%-95% (non-condensing) |
|
| EMC standards | EN55015, EN61000-3-2, EN61000-3-3, EN61547 | |
| Safety standard | EN61347-1,EN61347-2-13 | |
| Environmental Requirement | Compliant to RoHS | |
| Certificate | CE pending | |
| IP Rating | IP20 | |
| Protection Class | Class II | |
| Installation | Built-in/stand-alone | |
| Dimension | 120x30x22mm | |
| Package | cartons | |
| Net Weight | 58g | |
| Lifetime | 5 years warranty @Ta 230V full load |
Application Notice
1) The sensor should be installed by a professional electrician. Please turn off the power before installing or wiring.
2) MC103S can only work with Merrytek DC sensor,please contact with Merrytek sales for right DC sensor model No.accroding to your application.
N/A
