| Input | Rated Voltage | 220-240Vac 50/60Hz | |||||
| Stand-by Power | ≤0.5W | ||||||
| Surge Test | 1KV(L/N,EN61000-4-5) | ||||||
| Output | Output Signal | ON/OFF | |||||
| Type of Load | Inductive or Resistive | ||||||
| Load Capacity | 400W@230Vac(Inductive) ; 800W@230Vac(Resistive) | ||||||
| Max. Surge Capacity | 7A relay 50A(50% Ipeak, twidth =200uS, 230Vac full load, cold start); |
||||||
| Sensor Parameters | Working Frequency | 5.8 GHz ±75MHz, ISM wave band | |||||
| Transmitting Power | 1mW Max. | ||||||
| Detection Area(Radius) | Ceiling mounting height 3m: r≥4m@0.3m/s, r≥2.5m@1m/s; Wall mounting height 3m: r≥5m@0.3m/s, r≥4m@1m/s Test condition: Set 100% sensitivity, open 60 ㎡ indoor area. |
||||||
| Mounting Height | 3m (6m Max) | ||||||
| Hold time | 5s/30s/90s/5min/20min/30min (Dial code) | ||||||
| Detection Area | 100%/75%/50%/25%(Dial code) | ||||||
| Daylight Sensor | Normal Daylight | 2Lux/10Lux/30Lux//50Lux/Disable(Dial code) | |||||
| Operating Temperature | -25℃…+60℃ | ||||||
| Storage Temperature | -40~80℃ Humidity: ≤85% non-condensing | ||||||
| Certificate Standards | Certified | CE, RED | |||||
| Environmental Requirements | Comply with RoHS 2.0 Reach | ||||||
| IP Rating | IP20 | ||||||
| Other | Remote Model | MH10; MH16; MH03 | |||||
| Wiring | Press-in Type Terminals, wire diameter: 0.5-0.75mm2 | ||||||
| Installation | Built-in | ||||||
| Package | Bubble bag+Clapboard + Carton(K=A) | ||||||
| Net Weight | 38 ±2g | ||||||
| Lifetime | 5 years warranty@Ta | ||||||
Initialization
The light will be turned on 100% brightness after power on, and will be turned off after 10 seconds. During initialization, no external motion sensing signal will be detected.
Default Setting
Sensitivity: 100% Hold time: 5s Daylight sensor: Disable
Application Notice
N/A
