MLC40CC-PD2

Isolated two-stage circuit frame, full dimming and flicker-free.
Support DIP switches to set the current gear；Slide Switches to select the CC/CW/WW
Support 8.5V auxiliary power supply, with sensing split head can achieve integrated sensing function.
Equip with PWM dimming control port.
Suitable for various microwave sensors or wireless smart modules.

Input	Rated voltage	220-240V AC 50Hz/60Hz
	Stand-by power	≤0.5W（No Equip with sensing split head）
	Surge	1KV(L/N,EN61000-4-5)
	Power factor	≥0.95 (230V Max load)
	Input current	≤0.23A @230VAC full load
	Inrush current	≤30A（100us half-current）@230V AC
	Working efficiency	≥86% (230V Max load)
Output	Working model	CC
	Type of load	LED
	Flick	≤5%
	Constant current accuracy	Constant current accuracy ±5%
	Auxiliary driver parameters	8.5VDC Current: 100mA Max
	No-load output voltage	70VDC Max
	Full load power	40W Max
	Load current	900mA/950mA/1000mA/1050mA
	Load output voltage range	900mA / 20-42VDC 950mA / 20-45VDC 1000mA /20-40VDC 1050mA /20-38VDC
Abnormality Protection Requirements	Protection mode	Input overvoltage protection; Input no-load protection no-load protection Input short circuit protection
Environmental Requirements	Operating temperature	Built-in：-25…+60℃
	Tcase-max	85℃
	Storage temperature/humidity	-40℃…+80℃ Humidity: ≤85% （non-condensation）
Certificate Standards	Certificate	CE、UKCA、SAA
	Environmental require ment	RoHS2.0, Reach requirement
	Safety standards（LVD)	EN61347-1, EN61347-2-13
	EMC standards	EN55015, EN61547, EN61000-3-2, EN61000-3-3
	Withstand voltage	Primary to secondary: 3.75KVAC
	IP Rating	IP20
	Product Category	Class II
Others	Wiring method	Press terminal, wire diameter：0.5-1.0mm2
	Installation	Built-in
	Package	PE bag clapboard, carton（K=A）
	Net weight	135 ±5g
	Lifetime	5years warranty@Ta50/TC70℃，230V full load

Initialization

After power-on, it is half bright, and after self-test, it enters the 0-10V port voltage setting brightness (suspended for full bright).

Default Setting

Adjust the corresponding current gear according to the order or customer demand.

Application Notice

Please use this product in accordance with the specifications. Failure may occur if the product is used beyond the use conditions.
The product should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switches.
The load LED string must be connected first, and then turn on the input power, otherwise it may damage the LED string.
After the LED drive input is powered off, there will be residual voltage at the output end, which can be maintained for about 3 minutes.

N/A

Related Products